header22.jpg

Horue spare front wing

PrintEmail
Horue spare front wing
Incl.tax 24%: 369,00 €
Size
Horue spare front wing
Horue spare front wing
Horue spare front wing
Horue spare front wing
Horue spare front wing
Horue spare front wing
Horue spare front wing
Description

The Set of extra wing includes :

- 1 front wing 100% carbon Cruising or Lightwind or Xtrm Lightwind (for Horue GP - Vini - Tae)

 

Warning: mast and stabilizer are not included!!!

CRUISING FRONT WING
We reworked the profile and the overall geometry of the wing to amazingly improve its performance and stability. The new profile is an evolution of the one used for the wing lightwind and helps push the maximum speeds up to limits never reached in windfoil yet. This wing allowed Philippe Caneri to finish final line for all races of the Défi Wind 2015in windfoil in a strong 40-45 knots wind .

The Cruising frontwing is ideal in winds above 18 knots windfoil, and is 100% compatible with kitefoil use from less than 8kts.

This wing is designed using CAD with a profile specially designed hydrofoil use, it is proudly made in France, 100% carbon in a CNC machined mold.

Features:

  • 100% carbon - locked flex
  • elliptical lift distribution - minimization of induced drag
  • forwarded thrust centre- early planing
  • low Cx template - low drag
  • CNC molded
  • windfoil and kitefoil use (18-40+kts windfoil / 8-30+kts kitefoil)

 

LIGHTWIND FRONT WING
The wing Horue lightwind is intended to be mounted on the foil Horue Gp for use in a 8-25nds wind range, with the same stabilizer.

This front wing developed by our three engineers, and is the result of six months of research on performance in light wind condition. The profile allows minimizing the drag before take off and providing a powerful lift even at low speeds, allowing very long gliding even when the wind drops. The global shape has allowed us to obtain a forwarded center of thrust for a very early start planing. The elliptical lift distribution ensures minimum induced drag.

Features:

  • 100% carbon - flex locked
  • elliptical lift distribution - the lowest induced drag
  • forwarded thrust centre- early planing
  • high Cz template - powerful lift
  • CNC molded
  • take off in 8kts wind
  • windfoil use only in 8-22kts

 

XTREM LIGHTWIND FRONT WING
Developed from the wing lightwind drawn by three engineers, it gather their mains advantages but with a larger area.

The progressive profile retained on this model allows the wing to adapt to the Reynolds number encountered throughout the span of the wing. The result is an increased aerodynamic finesse, which provides more powerful lift that will allow heavier riders flying before 8 knots. For this model with an impressive wingspan, we especially worked on the flex in order to "pump" on the wing for even faster planing. The wing is ideal for 8 knots wind with heavy rider in windfoil. This wing is designed in CAD with a special hydrofoil profile, it is proudly made in France, 100% carbon in a CNC machined mold.

Features:

  • 100% carbon - flex locked
  • elliptical lift distribution - minimization of induced drag
  • forwarded thrust centre- early planing
  • high Cz template - powerful lift
  • CNC molded
  • take off in 8 kts wind
  • windfoil use only in 6-15kts

free paddle bag for every preorder quick blade paddle

 

 

free shipping for eu countries

 

 

 free boardbag

Joomla Extensions powered by Joobi